Doremi ShowVault / IMB - Manual (Page 111)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 111 of 276 Version 1.7
Doremi Labs
Figure 137: Fixed-Length and End of Line Byte Examples
Note: It may take up to 30 seconds before the new configuration is applicable.

After the serial device has been configured, the user can set the trigger from the serial
port or automation actions to serial port.
7.7.9 ISE1 Device
The ISE1 Device provides for communication with the IMAX Secure Enclosure. If more
information is needed, please contact Doremi Labs Technical Support (Section 1.3).
7.7.10 CSS Device
The CSS Device provides for communication with the Sony Cavity Security System. If more
information is needed, please contact Doremi Labs Technical Support (Section 1.3).
7.7.11 3D Configuration
When using a ShowVault configuration for 3D presentation, the projector needs to be set to the
proper color space. Contact the projector vendor to configure the projector properly.
7.7.11.1 Dolby 3D Support
To enable the Dolby 3D support, please contact Doremi Labs Technical Support to receive the
appropriate license (Section 1.3).
7.7.11.2 RealD 3D Support
To enable the RealD 3D support, please contact RealD at [email protected] to
receive the appropriate license. Once the license has been received, follow the steps below:
 Open the Device Manager GUI by clicking on Menu → Doremi Apps. → Device
Manager.

The following window will appear (Figure 138):