Doremi ShowVault / IMB - Manual (Page 106)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 106 of 276 Version 1.7
Doremi Labs
7.7.4.1 Removing an eCNA Device

To remove the eCNA device, select it in the Device Manager GUI and click the Delete
button (Figure 130).
7.7.5 Adding a JNior Device

To add the JNior device, click the Add button in the Device Manager window.

The Add Device window will appear. Select JNior and click the Add button.

The Device Manager GUI will be updated to reflect the addition of the JNior device
(Figure 131).

Input the JNior Server IP address in the appropriate field as illustrated below (Figure
131).
Figure 131: Device Manager GUI – JNior Device Configuration

The port number field will already contain the appropriate value (factory default value).
Note: The JNior device documentation will provide the correct username and password
(factory default values).

Click the Save button to record the settings. A window will appear asking for a password.
Enter the password to proceed.

Click Quit when finished with the configuration. If not, continue and add more devices.
JNior IP
Address Field
Add
Button
Delete
Button