Doremi ShowVault / IMB - Manual (Page 95)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 95 of 276 Version 1.7
Doremi Labs
7.6.3 Input Settings Tab
The first tab displays and controls the input source and scaling (Figure 121).

Input: The following sources are supported:
◦ Internal: signal source is the ShowVault unit.
◦ HDMI: signal source is an external device (e.g., BD player) that connects via HDMI®
cable to the IMB.
▪ Note: The ShowVault incorporates High-Definition Multimedia Interface
technology.
◦ SDI: signal source is an external device that connects via SDI cables to the IMB.

Scaling: The following masking/scaling options are selectable from the drop-down menu.
◦ Side Masking
◦ Top/Bottom Masking
◦ One-to-One
Figure 121: Device Controller GUI
Devices that
are already
configured