Doremi ShowVault / IMB - Manual (Page 242)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 242 of 276 Version 1.7
Doremi Labs
22.2 HFR Setup
For HFR setups, the user must be running software version 2.6.3 or higher.
Primary IMB (SM):

Firmware: 32.07d or higher.

Alternative Firmware: 32.06z or higher.

Security Manager: 5.1.4 or higher.
Secondary IMB (LD):

Firmware: 33.05k or higher.

Alternative Firmware: 33.07a or higher.

Security Manager: 5.1.4 or higher.
22.3 Non-HFR Setup
For non-HFR setups, the user must be running software version 2.6.3 or higher.
Primary IMB (SM):

Firmware: 32.07d or higher.

Security Manager: 5.1.4 or higher.
Secondary IMB (LD):

Firmware: 33.05k or higher.

Security Manager: 5.1.4 or higher.
22.4 Installation and Power-Up Sequence
Installation:

Verify that both projectors and the ShowVault are turned off.

Install the IMB-SM in the primary projector.

Install the IMB-LD in the secondary projector.

Connect Ethernet cables to both projectors and the ShowVault and verify that they are
on the same network.

Connect the PCI-express cable from the ShowVault to the IMB-SM (primary projector).

Connect BNC cables (A and B) fr om the Primary Projector’s SDI-out connectors to the
Secondary Projector’s SDI-In connectors (Figure 319).