Doremi ShowVault / IMB - Manual (Page 94)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 94 of 276 Version 1.7
Doremi Labs
7.6.2 Registered Tab
Figure 120: Device Controller GUI - Registered Tab

If the device was previously created/registered in the Device Manager GUI, then it will
automatically appear in the "Registered" tab of the Device Controller GUI.

An IMB or Sony SRX Projector will be automatically dedicated by the Device Controller
application when added to the network.

Click on the List of all Devices window and select the device to control (Figure 120).

The following parameters are shown in the Registered tab for the device:
◦ Name
◦ Type
◦ IP
◦ Port

In case of the Sony projectors, the IP must always be 127.0.0.1; otherwise, the
Sony setup will not function properly.

The "Port" number is automatically populated. Please do not alter this field.

Select the device to control and then click the "Connect" button. Or, select the device
from the drop-down menu to connect to the device to control. The Device Controller
window will display four tabs that will allow the user to configure, control, and manage
the device.

The Status Indicator shows whether the device is: Online "green," stand-by mode in
"Yellow," or offline, which is "Red." In this case, it is green.
List of All
Devices
Manually
Creating a
New Device
Registered
Devices