Doremi ShowVault / IMB - Manual (Page 202)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 202 of 276 Version 1.7
Doremi Labs
Figure 266: Signal Setup Window

Click the Ok button when the appropriate signal name is defined.
16.2.2 Connection to a Signal Event

Click the Connect to an Event button from Macro Editor's Trigger Cue tab. The Events
window will appear (Figure 264).

Click the Signal button. The Signal Setup window will appear.

Choose the device from the drop-down menu (Figure 267).

Choose the signal from the drop-down menu (Figure 268).

Click Ok when finished and the connected Signal event will appear in the right part
of the Editor tab.
Note: The “...” button will prompt the Signal Library window to appear (Figure 269). The Signal
Library has a list of additional signals that are not listed in the signal drop-down menu. For
example, the JNior device has a subsidiary device called the JNior Expansion Module.
However, the JNior Expansion Module does not appear in the source device drop-down menu.
Use the Signal Library button to access all possible signals.
Figure 267: Device Name Window
Signal
Library
Button