Doremi ShowVault / IMB - Manual (Page 21)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 21 of 276 Version 1.7
Doremi Labs
5 Network Configuration
5.1 Default Network Configuration
All servers are shipped from the factory with a default IP address of 192.168.100.50 on the
Ethernet port (Eth1) and a DHCP assigned dynamic IP address on the Ethernet port (Eth0).
5.2 Changing the IP Address
To change the IP address of the server, select Menu → System → Networking Configuration
and then follow the steps below:

A window will appear asking for a password as illustrated below (Figure 14):
Figure 14: Password Confirmation Window

Follow the steps according to the Ethernet Networking Configuration Wizard (Figure 15).
Figure 15: Network Configuration

Press Enter to confirm the configuration of each page of the Ethernet Networking
Configuration Wizard. Press Tab to select an option.
 Enter the desired system’s hostname and then press Enter.
o Note: It is a good idea to put the circuit location/screen number in here. For
example, “AMC_bir_scr1,” as it will be easier to identify when connecting via
VNC and in the logs.

Enter the desired system domain name and then press Enter.

Select Yes to set eth0 and then press Enter.