Doremi ShowVault / IMB - Manual (Page 136)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 136 of 276 Version 1.7
Doremi Labs
7.16 Theater Properties
The Theater Properties tab allows the user to specify theater properties, such as the facility
name, address, auditorium specifics, and contact information. The user may add one facility per
ShowVault. To access the Theater Properties tab, go to Con
trol Panel → Theater Properties.
This information is necessary as it contains information needed for the generation of the FLM
file. The information is used by studios in KDM management.
7.16.1 Facility Tab
The Theater Properties tab defaults to the Facilities tab.
Here the user ca
n input the facility’s name and circuit. Click the Save button to save the
changes. Clicking the Refresh button without saving will cause all of the changes to be lost
(Figure 177).
Figure 177: Facility Tab
7.16.2 Auditorium Tab
Here the user can input the auditorium specifics such as screen aspect ratio and screen color.
Click the Save button to save the changes. Clicking the Refresh button without saving will cause
all of the changes to be lost (Figure 178).
Save
Button
Refresh
Button