Doremi ShowVault / IMB - Manual (Page 232)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 232 of 276 Version 1.7
Doremi Labs
Chasing a Timecode Source – The IMB and ShowVault can chase timecode from any HD-SDI
source that has embedded LTC timecode. To use an embedded timecode source, the HD-SDI
signal must be duplicated with a Distribution Amplifier (DA). The IMB/ShowVault does not
support daisy chaining timecode signals. This configuration allows for more than two IMBs to be
synchronized (Figure 307).
Figure 307: Chase a Timecode Generator Block Diagram
Embedded
Timecode
Source
Distribution
Amplifier
Slave Unit 1 Slave Unit n Slave Unit 2
Timecode
...