Doremi ShowVault / IMB - Manual (Page 213)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 213 of 276 Version 1.7
Doremi Labs
18.4 Adjusting the Default Values

From the desktop Menu go to System and click on Terminal. The Terminal window will
appear.
 Type “su” and press Enter (Figure 280).

Enter the appropriate password (contact the administrator for the password).

Type: mount -o rw,remount / and then press Enter.
o Note: The spaces in between the characters must be respected.

Type: xedit /doremi/etc/default/cinelister.config.sample and press Enter.

The user will be prompted to the xedit window (Figure 281).

Change the value to reflect the desired preference. Example: default setting is at 180
seconds, which is 3 minutes. To change it to 1 minute, type 60 instead.

Make sure to click Save in the xedit window when finished (Figure 281).
Note: Use the up/down and left/right arrows on the keyboard to navigate in the xedit window.
Figure 280: Terminal Window