Doremi ShowVault / IMB - Manual (Page 108)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 108 of 276 Version 1.7
Doremi Labs
7.7.7 Removing a Raw Device

To remove the Raw device, click on it in the Device Manager GUI and press the Delete
button (Figure 132).
7.7.8 Adding a Serial Device

The Serial device is used to be able to manage incoming and outgoing messages over a
serial port. It is a new feature that allows the user to control or interact with some old
legacy device that usually communicates only through serial cables. Outgoing messages
can be sent to the automation using a simple basic automation cue. Incoming messages
are parsed, and then sent to the playback engine in the form of a signal trigger.

The schema below explains how the daemon is run (Figure 133):
Figure 133: Serial Device Schema

The file device.xml contains all elements to configure properly the serial port and how to
scan incoming messages. This file is conveniently managed by the Device Manager GUI
application. The generic serial device driver can manage different serial ports
simultaneously.

Go to Menu → Doremi Apps. → Device Manager and follow the steps below. The
following window will appear (Figure 134):