Doremi DC-POST User Manual

D c - p o s t, User manual

D C - P o s t

DIGITAL CINEMA SERVER

User Manual

Version 1.2

The English version of this document is the only legally binding version.
Translated versions are not legally binding and are for convenience only.

DPT.OM.001128.DRM Page 1 of 101 Version 1.2

Doremi Labs

Table of contents

Document Outline

1 Introduction
- 1.1 Purpose
- 1.2 Software Version
- 1.3 Contact Information
2 DC-Post Presentation
- 2.1 Launching DC-Post's CineLister
- 2.2 Passwords
- 2.3 Software and Firmware Upgrade
3 Ingesting Content
- 3.1 Ingesting Content
- 3.2 Content Types
4 Ingest Phase
- 4.1 Ingesting content form a USB Drive
- 4.2 Ingesting Content from a Remote Doremi Server/LMS
  - 4.2.1 File Transfer Protocol (FTP)
  - 4.2.2 Ingest from a Doremi Remote Server or Library Management Server
- 4.3 Ingest Progress
- 4.4 Pngest
  - 4.4.1 How to Pngest a CPL
5 Show Management With CineLister
- 5.1 CineLister Editor Tab
6 Show Playlists
- 6.1 Audio-Visual Content
- 6.2 Show Playlist Creation
  - 6.2.1 Create a New Show Playlist
  - 6.2.2 Re-Ordering Elements
- 6.3 Refresh Button
- 6.4 Save Button
- 6.5 Export Show Playlist
- 6.6 Import Show Playlist
7 Element Properties
- 7.1 Viewing the “Properties” Elements
- 7.2 Unencrypted CPL's
- 7.3 Encrypted CPL with KDM Valid for more than 48 Hours
- 7.4 Encrypted CPL with KDM Valid for Less than 48 Hours
- 7.5 How to delete a CPL from the server
8 Play 2D Content in 3D Mode
- 8.1 3D Mode Set Up
9 Accessing a Show Playlist
- 9.1 Editing an Existing Show Playlist
- 9.2 Deleting a Show Playlist
10 Automation Cues
- 10.1 Macro Creation Using “Macro Editor”
- 10.2 Editing a Macro Automation Cue
- 10.3 Inserting Actions into Macro Cues
- 10.4 Actions Explained
- 10.5 Action Settings
- 10.6 Automation Library Usage
  - 10.6.1 Adding Actions from the eCNA and JNior Libraries
11 Adding Macro Cues to a Show Playlist
- 11.1 How to add a Macro Cue to an SPL
- 11.2 Editing the Actions
  - 11.2.1 To change the order of Actions
  - 11.2.2 To change the settings of an action
- 11.3 Macro Saving
12 Trigger Cue
- 12.1 Trigger Cue Tab Overview
- 12.2 Trigger Cue Creation
- 12.3 How to create a new Trigger Cue
- 12.4 Connecting a Trigger Cue to an Event
  - 12.4.1 Connecting a Trigger Cue to a GPI event
  - 12.4.2 Connecting a Trigger Cue to a Signal event
- 12.5 Trigger Cue Saving
13 Adding a Trigger Cue to a Show Playlist
- 13.1 Adding a Trigger Cue for One Element of the Show Playlist
- 13.2 CineLister's Playback Tab
  - 13.2.1 To Playback an Existing SPL
- 13.3 Playback Progress
- 13.4 Pause Mode
  - 13.4.1 Pause Mode Functions
- 13.5 Adjust the Value of the Fast Forward and Rewind Functions
- 13.6 Playback of a Live Event
- 13.7 Adding a Live Event CPL
- 13.8 Create and Play an SPL Using a Live Event CPL
- 13.9 Playback Lock Mode
- 13.10 Playback Alert Messages
14 CineLister's Schedule Tab
- 14.1 Schedule Tab Overview
- 14.2 Schedule Playback Messages
- 14.3 Show Playlist Removal
- 14.4 Playback Recovery Due to Power Failure
- 14.5 Recovering Playback
- 14.6 Shutting Down During a Playback
15 Virtual Keyboard
16 Device Manager Configuration
- 16.1 Adding a Projector
- 16.2 Removing a Projector
- 16.3 Dual Projector for 3D Usage
17 Automation Libraries Management
- 17.1 eCNA Device Addition
- 17.2 eCNA Device Removal
- 17.3 JNior Device Addition
- 17.4 JNior Device Removal
- 17.5 Raw Device Addition
  - 17.5.1 Adding a Raw Device
- 17.6 Raw Device Removal
- 17.7 ISE1 Device
- 17.8 CSS Device
- 17.9 3D Projector Configuration
  - 17.9.1 Projector Configuration for 3D or 48fps
- 17.10 Dolby 3D Support
- 17.11 RealD 3D Support
- 17.12 Sensio 3D Support
- 17.13 Closed Caption Support
18 Time Adjustment
- 18.1 Adjusting the System Time
19 Using the RCV2 for Variable Speed Playback
20 Authoring
- 20.1 Overview
  - 20.1.1 Accessing the CPL Authoring GUI
- 20.2 CPL Authoring Usage
  - 20.2.1 Adding a CPL to a Show Playlist
- 20.3 Navigation Buttons
- 20.4 Subtitle XML File Area
21 Acronyms
22 Document Revision History
23 RCV2 Remote Controller
24 RCV2 Connection
25 RCV2 Operation
- 25.1 Keypad Area
- 25.2 Menu Controls and Jog/Shuttle
- 25.3 Navigation Buttons
26 Disabling the RCV2 control capability