EXFO IQS-8500 Series for IQS-600 - Manual (Page 505)

Pop-Up Windows
Ethernet and Fibre Channel Application 491
IPv6 Address Configuration
Destination IPv6 Address
Note: Destination IPv6 address is only available for EtherSAM services
configuration.

IP Address: Enter the destination IP address for the selected service.

Ping button: Press Ping to automatically start the quick Ping utility for
the service destination IP address using the Ping parameters from the
Setup on page 396. Refer to Ping on page 504 for more information.

Resolve MAC Address: When enabled, will send a request to the
network to retrieve the MAC address corresponding to the selected
destination IP address. This setting is disabled by default.
MAX Address Status: Indicates the Resolve MAC address status.
Possible status are:
Status Description
-- The Resolve MAC address is not enabled.
Resolving The MAC address is being resolved.
Resolved The MAC address is resolved and the next-hop
reachability is confirmed.
Unreachable The MAC address is resolved and the next-hop is
unreachable.
Failed The MAC address cannot be resolved.