beautypg.com

Pattern (bert), Alarms – EXFO IQS-8500 Series for IQS-600 User Manual

Page 455

background image

Expert Mode Tabs

Ethernet and Fibre Channel Application

441

Pattern (BERT)

Pattern (BERT)

Press TEST, Expert Mode, and Pattern.

Enable Criteria: Enable Criteria enables configuring the Pattern pass/fail
threshold values and parameters (Port 1 and Port 2 for Dual Ports on
IQS-8510B). This setting is disabled by default.

Alarms

Enter the threshold value for each alarm: Pattern Loss and No Traffic.

Status: Indicates the real-time pass/fail condition.

Grey LED: Indicates that Expert Mode is disabled or the test did not
run yet.
Green LED: Indicates that the threshold is respected (Pass).
Red LED: Indicates that the threshold is not respected (Fail).

Unit: The unit is Second.

This manual is related to the following products: