EXFO IQS-8500 Series for IQS-600 - Manual (Page 110)

Creating and Starting a Test Case
96 FTB-8500 Series and FTB-8120NGE/8130NGE
Ethernet BERT Test Case
To create a BERT test case:
1. Test configuration:
1a. Select Ethernet 10/100/1000 or
Ethernet 10G as the Interface Type.
Interface Type is not available with
IQS-8510G.
1b. For IQS-8510B: Select the Topology test
type: Single Port or Dual Ports.
1c. Select BERT as the Application Type.
1d. Press Next.
2. Port configuration:
2a. Select the port Connector
Type (Optical or
Electrical RJ-45). Optical is automatically selected for the
Ethernet 10G interface.
2b. For IQS-8510B, select the
port number by pressing
on Port 1 or Port 2.
For IQS-8510B in Dual
Ports, select the first port
and proceed with the rest
of the configuration for the
first port. However, before
pressing Finish, press
Back several times to
return to the port setup
window, select the second
port and proceed with the
rest of the configuration for the second port.