EXFO IQS-8500 Series for IQS-600 - Manual (Page 473)

Specifications
Ethernet and Fibre Channel Application 459
Fibre Channel Interfaces
For IQS-8120NGE/IQS-8130NGE and IQS-8525/IQS-8535:
Wavelength (nm) 850 1310 1310 1550
Tx level (dBm) –9 to –2.5 –8.4 to –3 0 to +5 +1 to +5
Rx level sensitivity (dBm) –15 at FC-4 –18 at FC-4 –18 at FC-4 –16.5 at FC-4
–18 at FC-2 –21 at FC-2 –21 at FC-2 –20.5 at FC-2
–20 at FC-1 –22 at FC-1 –22 at FC-1 –22 at FC-1
Maximum reach 500 m on 50/125 μm MMF a 4 km 30 km 40 km
300 m on 62.5/125 μm MMF a
Transmission bit rate (Gbit/s) 1.06/2.125/4.25 1.06/2.125/4.25 1.06/2.125/4.25 1.06/2.125/4.25
Reception bit rate (Gbit/s) 1.06/2.125/4.25 1.06/2.125/4.25 1.06/2.125/4.25 1.06/2.125/4.25
Tx operational wavelength range (nm) 830 to 860 1260 to 1350 1285 to 1345 1544.5 to 1557.5
Measurement accuracy:
Frequency (ppm) ±4.6 ±4.6 ±4.6 ±4.6
Optical power (dB) ±2 ±2 ±2 ±2
Max Rx before damage (dBm) +3 +3 +3 +3
Jitter compliance ANSI FC-PI-2 ANSI FC-PI-2 ANSI FC-PI-2 ANSI FC-PI-2
FC classification ANSI FC-PI-2 ANSI FC-PI-2 ANSI FC-PI-2 ANSI FC-PI-2
Laser type VCSEL Fabry-Perot DFB DFB
Eye safety Class 1 Class 1 Class 1 Class 1
Connector LC LC LC LC
Transceiver type SFP SFP SFP SFP
FC-10X
Wavelength (nm) 850 1310 1310 1550 1550
Tx level (dBm) –5 to –1 +0.5 max –6 to –1 –1 to +2 0 to +4
Rx level sensitivity (dBm) –11.1 –12.6 –14.4 –16 –23
Maximum reach 300 m on 50/125 μm MMF 10 km 10 km 40 km 80 km
30 m on 62.5/125 μm MMF
Transmission bit rate (Gbit/s) 10.5 10.5 10.5 10.5 10.5
Reception bit rate (Gbit/s) 10.5 10.5 10.5 10.5 10.5
Tx operational wavelength range (nm) 840 to 860 1260 to 1355 1290 to 1330 1530 to 1565 1530 to 1565
Measurement accuracy:
Frequency (ppm) ±4.6 ±4.6 ±4.6 ±4.6 ±4.6
Optical power (dB) ±2 ±2 ±2 ±2 ±2
Max Rx before damage (dBm) +6 +6 +6 +2 +4
Jitter compliance ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3
FC classification ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3
Laser type VCSEL DFB DFB EML EML
Eye safety Class 1 Class 1 Class 1 Class 1 Class 1
Connector LC LC LC LC LC
Transceiver type XFP XFP XFP XFP XFP
FC-1X/2X/4X
NOTE
a. Values in the table correspond to FC-1 rate. For FC-2, maximum reach is 300 m on 50/125 μm MMF and 150 m on 62.5/125 μm MMF. For FC-4, maximum reach is 150 m
on 50/125 μm MMF and 70 m on 62.5/125 μm MMF.