EXFO IQS-8500 Series for IQS-600 - Manual (Page 115)

Creating and Starting a Test Case
Ethernet and Fibre Channel Application 101
Ethernet BERT Test Case
5g. Enter the Maximum Rate (%), the default setting is 100% for all
speeds except for 10Gbps WAN which is 92.3076923076923%.
Refer to Traffic Shaping on page 215 for more information.
5h. Press Next.
6. Pattern configuration:
6a. Set the pattern parameters. Refer to
Pattern TX on page 254 for more
information.
6b. Press Finish to complete the test setup.
The Alarm summary tab is
automatically displayed.
7. For additional configuration parameters,
refer to Stream Generation Tabs on page 201.
8. Press the Start button to start the test.
9. For additional results, refer to Traffic Analyzer Tabs on page 161 and
Pattern Tabs on page 253.