EXFO IQS-8500 Series for IQS-600 - Manual (Page 138)

Summary Tabs
124 FTB-8500 Series and FTB-8120NGE/8130NGE
Test Summary

RFC 2544: Indicates the status of the running RFC 2544 test. This
setting is only available with RFC 2544 test. Possible status are:
--: Indicates that the test did not run yet.
Throughput/Back-to-Back/Frame Loss/Latency - In Progress:
Indicates that either the Throughput, Back-to-Back, Frame Loss, or
Latency test is running.
None - In Progress: Indicates that the link is down and no test is
performed.
Completed: Indicates that all selected tests are completed.
Aborted: Indicates that the test has been interrupted (stopped).
Test Configuration

Interface Type: Indicates the test interface type: Ethernet
10/100/1000, Ethernet 10G (IQS-8130NGE and IQS-8535), or Fibre
Channel. Not available with IQS-8510G.

Application Type: Indicates the test application type: EtherSAM
(Y.1564), Frame Analyzer, BERT, RFC 2544, Smart Loopback, or TCP
Throughput (Not available on IQS-8510G). Only BERT is available with
Fibre Channel.

Test Name: The name of the test connection is used to identify the test.
A maximum of 8 characters are allowed. The default setting is TEST.