EXFO VDSL2 - Manual (Page 92)

Multi-meter Tests
84 AXS-200/635i
Multi-meter
³
Connection defines the type of cable connection to be tested, as
specified in Regional Settings.
³
Temperature (F/C) is the temperature of the cable.
To start/stop the test:
1. Press the up/down arrow keys to highlight the desired test parameter.
2. Press to open the list or specify a value.
3. Press the up/down arrow keys to highlight the desired value.
OR
4. Press the left/right arrow keys to erase the existing value, and then use
the alphanumeric keypad to enter a value. To cancel the entry, press
.
5. Press to accept the value.
6. Select other parameters as required.
7. Press to start/stop the test.
Test results are displayed on the screen as they are completed.