Selected profile – EXFO VDSL2 User Manual
Page 160
Connection Setup for DSL/IP Triple-Play Verification Tests
152
AXS-200/635i
Setup Profile
Selected Profile
The Selected Profile tab allows you to configure and store multiple profiles
containing specific setups for the unit.
³
Line Mode lists the following
selections:
³
VDSL2-STGR is the default
selection for Lucent Stinger
9.11x Ikanos CO4 DSLAM.
³
VDSL2-ALCL is for generic
(e.g. Alcatel) VDSL2 DSLAMs in
North America.
³
ADSL2+ is for ADSL1/2/2+, Annex L, and T1.413
³
AUTO-DSL maps the associated profile to the defined DSLAM
sequence and measures a timeout to determine if the connection
fails to sync with the current DSLAM. If timeout, the next DSLAM
profile is mapped and starts the sync procedure.
³
Ethernet enables local area network testing.
³
HPNA-coax - If selected, verify that the ARU-100 HPNA test probe is
connected to the WAN port of your AXS-600 series module.
³
Access Mode displays a list of connection values. Default is Routed
PPPoE.
³
Profile Name is a list of all available profile files in the current directory
with the first entry being Default. Once you open the selected profile, it
remains active in the unit until a different or newer profile is selected.
You can store over 100 profiles.