EXFO VDSL2 - Manual (Page 75)

Auto Tests
Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set 67
Configuring Video-DSL Rate Prediction
To set parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press to display the list or select the value.
3. Press the up/down arrow keys to highlight the desired value.
OR
4. Press the left arrow key to erase the existing value, and then use the
alphanumeric keypad to enter a value. To cancel the entry, press .
5. Press to accept the value.
Common Parameters
The Common Param. tab allows you to
set up the Input Impedance in the
loop. The available choices are:
>1 MOhm, 100 KOhm.