EXFO VDSL2 - Manual (Page 33)

Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set 25
3 Auto Tests
The auto test function allows you to automatically run tests used in
pre-qualification, installation, and maintenance of different circuit types
from POTS to VDSL2. Auto tests include a range of different tests that
compare measured results against stored threshold values to provide pass
or fail results. The results are displayed in both text and graphical format.
To access Auto Tests:
1. From the Home pane use the up/down arrow keys to highlight Fault
Isolation Tools and press .
2. Highlight Auto Tests and press .
The following tests are included in the auto test function:
³
CQ Auto Test
³
Inactive Pair Test
³
Final/Active Pair Test
³
Video-DSL Rate Prediction
Configuring CQ Auto Tests
Parameters for auto test configuration are on the CQ Auto Test pane tabs.
To view CQ auto test
configuration tabs:
1. From the CQ Auto Test pane use
the up/down arrow keys to
highlight Test Configuration, and
press
.
2. Press the F1, F2, or F3 key to view
the various tabs. To view any
available additional tabs, use the
function arrow keys on either side of the F1 and F3 keys.