EXFO VDSL2 - Manual (Page 12)

Introducing the Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set
4 AXS-200/635i
Cable Connections
Cable Connections
The graphic below shows the connectors on the AXS-200/635i device.
Note: When connecting a DSL cable to the WAN port, use the RJ-45 plug end of
the 26AWG cable provided with the unit. There is a 1500V maximum
transient voltage on telecom ports. Basic is needed for external telecom
circuits.
Note: When connecting to the LAN port, use only shielded Ethernet cables during
DSL testing.
Primary tip/ring
3-pin connectors
Secondary tip/ring
3-pin connectors
LAN port for Ethernet
output
WAN port for Ethernet and
DSL input
Measuring ground
terminal