Impulse noise result – EXFO VDSL2 User Manual
Page 137

Wideband Tests
Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set
129
Impulse Noise Test
To start/stop the test:
1. Press the up/down arrow keys to highlight the desired test parameter.
2. Press
to open the list or specify a value.
3. Press the up/down arrow keys to highlight the desired value.
OR
4. Press the left/right arrow keys to erase the existing value, and then use
the alphanumeric keypad to enter a value. To cancel the entry, press
.
5. Press
to accept the value.
6. Select other parameters as required.
7. Press
to start/stop the test.
Impulse Noise Result
The Imp. Noise Result tab allows you
to view results of the wideband
impulse noise test in text form.
This manual is related to the following products: