Setup profile – EXFO VDSL2 User Manual
Page 159
Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set
151
10 Connection Setup for DSL/IP
Triple-Play Verification Tests
The purpose of the Connection Setup function is to configure the unit for a
series of connection parameters for Auto and Manual Test, IPTV, data, VoIP,
and HPNA analyses. These parameters are accessible through the different
pane tabs.
To configure the connection parameters during DSL/IP tests:
1. From the DSL/IP Tests pane, use the up/down arrows to select the
Connection Setup entry.
2. Press
to confirm the selection.
To view the available tabs:
Press the left/right function arrows on each side of the F1, F2, and F3 keys.
Setup Profile
Profiles can be created and stored in the internal memory for later use.
They can also be stored externally or exported to another unit via a USB
memory device. You can easily load an external profile through the USB
port.