EXFO VDSL2 - Manual (Page 27)

Getting Started with Fault Isolation Tools
Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set 19
Regional Settings
Standard
The Standard tab allows you to set
unit parameter values for the selected
profile composed of current Distance
Units and Cable Gauge.
³
Standard allows you to specify if
the fault isolation tools should
conform to the ITU (International
Telecommunication Union) or
ANSI (American National
Standards Institute) standard.
³
Temperature allows you to specify the units of measurement for
temperature in F (Fahrenheit) or C (Celsius).
³
Connection allows you to specify the default type of cable connections
as T-R-G or A-B-E.
To select the parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press to display the list.
3. Use the up/down arrow keys to highlight the desired value, and press
to accept the value.