EXFO VDSL2 - Manual (Page 57)

Auto Tests
Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set 49
Running Inactive Pair Test and Viewing Results
Running Inactive Pair Test and Viewing Results
Results details are located on the Inactive Pair Test pane tabs.
To run the tests and view results:
1. From the Inactive Pair Test pane
use the up/down arrow keys to
highlight Run Test, and press
.
2. Once the tests are completed,
highlight the Details button from
the Result Summary pane and
press
to view the results.
3. Press the F1, F2, or F3 key to view
the various tabs. To view any available additional tabs, use the function
arrow keys on either side of the F1 and F3 keys.
Result Summary
The Result Summary tab allows you to
view the pass/fail status and Details of
all tests configured for the
Inactive Pair Test.
To view more information about
each available test result:
1. Press the up/down arrows to
highlight the Details button
alongside the desired test result.
2. Press to select the desired Details button.
3. To return to the Result Summary pane, press .