Cabletron Systems CSX1000 - Manual (Page 586)

USER’S GUIDE
586 CyberSWITCH
snmpInReadOnlys
The total number of valid SNMP PDUs that were delivered to the SNMP Agent and for which the
value of the error-status field is “readOnly”. It should be noted that it is a protocol error to generate
an SNMP PDU that contains the value “readOnly” in the error-status field, as such this object is
provided as a means of detecting incorrect implementations of the SNMP.
snmpInGenErrs
The total number of SNMP PDUs that were delivered to the SNMP Agent and for which the value
of the error-status field is “genErr”.
snmpInTotalReqVars
The total number of MIB objects that have been retrieved successfully by the SNMP Agent as the
result of receiving valid SNMP Get-Request and Get-Next PDUs.
snmpInTotalSetVars
The total number of MIB objects that have been altered successfully by the SNMP Agent as the
result of receiving valid SNMP Set-Request PDUs.
snmpInGetRequests
The total number of SNMP Get-Request PDUs that have been accepted and processed by the SNMP
Agent.
snmpInGetNexts
The total number of SNMP Get-Next PDUs that have been accepted and processed by the SNMP
Agent.
snmpInSetRequests
The total number of SNMP Set-Request PDUs that have been accepted and processed by the SNMP
Agent.
snmpInGetResponses
The total number of SNMP Get-Response PDUs that have been accepted and processed by the
SNMP Agent.
snmpInTraps
The total number of SNMP Trap PDUs that have been accepted and processed by the SNMP Agent.
snmpOutTooBigs
The total number of SNMP PDUs that were generated by the SNMP Agent and for which the value
of the error-status field is “tooBig”.
snmpOutNoSuchNames
The total number of SNMP PDUs that were generated by the SNMP Agent and for which the value
of the error-status is “noSuchName”.
snmpOutBadValues
The total number of SNMP PDUs that were generated by the SNMP Agent and for which the value
of the error-status field is “badValue”.
snmpOutGenErrs
The total number of SNMP PDUs that were generated by the SNMP Agent and for which the value
of the error-status field is “genErr”.