Static route via radius configuration elements, Ip address pool, Configuring an ip address pool – Cabletron Systems CSX1000 User Manual
Page 240: Ip address pool configuration elements, Ip address pool 240, Ip a
USER’S GUIDE
240 CyberSWITCH
S
TATIC
R
OUTE
VIA
RADIUS C
ONFIGURATION
E
LEMENTS
S
TATIC
R
OUTE
VIA
RADIUS S
TATUS
You may enable or disable this option.
S
TATIC
R
OUTE
L
OOKUP
VIA
RADIUS B
ACKGROUND
I
NFORMATION
The Static Routes Lookup via RADIUS option allows you to maintain static routes for devices on
the RADIUS Server. When there are multiple CyberSWITCHes at one site, the IP static routes
information needs to be duplicated on all systems. The Static Route Lookup via RADIUS feature
allows you to maintain all of the IP static routes information for multiple systems on the RADIUS
server by enabling this feature. The systems will download necessary static routes information
from the server when needed.
Refer to this guide’s RADIUS configuration information. The RADIUS Authentication Server User’s
Guide (an electronic document) also provides information on the RADIUS Authentication Server.
Refer to
for instructions on obtaining this document.
IP A
DDRESS
P
OOL
C
ONFIGURING
AN
IP A
DDRESS
P
OOL
U
SING
CFGEDIT
1.
Select IP Address Pool from the IP menu.
2.
Select to add an IP address.
3.
If you are adding a single IP address:
a.
Enter the IP address.
b.
When prompted to enter the ending IP address press
4.
If you are adding a range of IP addresses:
a.
Enter the first IP address in the range.
b.
Enter the ending IP address in the range.
Note:
A range of IP addresses can cover the associated interface IP address; however, this
interface address will not be added to the IP address pool.
5.
To delete a single IP address contained in a configured range:
a.
Select to delete an IP address.
b.
Select the Id of the range you want to delete the address from.
c.
Select to delete a single IP address contained in the range.
d. Enter the IP address you would like to delete from the range.
IP A
DDRESS
P
OOL
C
ONFIGURATION
E
LEMENTS
IP A
DDRESS
This can be a single IP address, or a range of IP addresses that can be dynamically assigned to
remote IP devices as they connect to the system.