Cabletron Systems CSX1000 User Manual
Page 431
Workgroup Remote Access Switch 431
S
YSTEM
M
ESSAGES
System Message Summary
[AUTH] ACE Encryption configured for DES: not supported.
The ACE server is configured for DES encryption. Only SDI encryption is currently supported by
the ACE client.
[AUTH] ACE Error receiving server log message acknowledgment.
A client syntax error occurred during an authentication attempt via ACE. The server did not
respond to the logging of the message. Make sure the ACE server configuration is accurate.
[AUTH] ACE LOGIN rejected user:
has occurred:
1.
The
2.
The
[AUTH] ACE Node verification received; Client initialized.
The CyberSWITCH ACE client was in an initialized state. Node verification was received from the
server and the initialization cycle is complete.
[AUTH] ACE No server configured for designated database location.
ACE is configured as a database location for security authentication. Either no ACE server has been
configured or an error occurred when parsing the ACE server configuration.
[AUTH] RADIUS CHAP rejected for device:
device. This usually indicates that one of the following has occurred:
1.
The
2.
The device’s CHAP response was not calculated properly.
3.
The device’s SECRET does not match the secret in the RADIUS server’s database.
4.
The RADIUS server’s database entry for this device contains errors.
[AUTH] RADIUS HDLC BRIDGE rejected bridge address:
following has occurred:
1.
The
2.
The
[AUTH] RADIUS INTERFACE LOOKUP rejected name
that one of the following has occurred:
1.
The < interface name> is not in the remote Authentication server’s database.
2.
The < interface name > is entered incorrectly in the remote Authentication server’s database.