The csx1200-u4-mod, The csx1200-u4-mod 50, User’s guide 50 cyberswitch – Cabletron Systems CSX1000 User Manual
Page 50
USER’S GUIDE
50 CyberSWITCH
T
HE
CSX1200-U4-MOD
The CSX1200-U4-MOD is a U-interface option card for the CSX1200 family. This module is only
relevant for applications in North America, since North American telephone companies typically
do not provide the needed U-interface conversion. The CSX1200-U4-MOD performs the function
of an external NT1, and is available for the BRI (1201, 1204) CSX1200 models. Below, we show the
module installed in a CSX1223.
The module consists of four pairs of numbered RJ45 ports. To activate the installed module, you
must properly connect the CSX1200 BRI ports to the corresponding S/T interface ports on the U4
module. This process, along with complete installation instructions, is detailed in the
chapter.
This module is also equipped with four NT1 Status LEDs to indicate the status of each of the ports.
Refer to the
chapter for further information.
CONSOLE
10Base-T
AUI
SLOT 1
SLOT 2
S
L
O
T
4
S
L
O
T
3
S/T
U
S/T
U
S/T
U
S/T
U
1
2
3
4
CSX1223 with CSX1200-U4-MOD
B25 B27
B26 B28
WORKGROUP REMOTE ACCESS SWITCH
B29
E1 ONLY
B-CHANNELS
LAN
10BASE-T
RX
TX
SERVICE
B31
B30 L1
B21 B23
B22 B24
B17 B19
B18 B20
B13 B15
B14 B16
E1
D
T1
D
B9
B11
B10 B12
B5
B7
B6
B8
B1
B3
B2
B4
POWER