Cabletron Systems CSX1000 - Manual (Page 432)

USER’S GUIDE
432 CyberSWITCH
[AUTH] RADIUS IP HOST rejected IP Host id:
The remote Authentication server rejected the IP Host id. This indicates that one of the following
has occurred:
1. The is not in the remote Authentication server’s database.
2. The is entered incorrectly in the remote Authentication server’s database.
[AUTH] RADIUS IP RESOLVE rejected IP Address:
The remote Authentication Server rejected the IP Address Resolution authentication request for the
indicated IP Address. This usually indicates that one of the following has occurred:
1. The is not in the remote Authentication server’s database.
2. The Authentication server’s database entry for this IP Address contains errors.
[AUTH] RADIUS LOGIN rejected device:
The remote Authentication server rejected the named device. This indicates that one of the
following has occurred:
1. The is not in the remote Authentication server’s database.
2. The is entered incorrectly in the remote Authentication server’s database.
[AUTH] RADIUS PAP rejected device:
The remote Authentication server rejected the PAP mode authentication request for the indicated
device. This usually indicates that one of the following has occurred.
1. The is not in the remote Authentication server’s database.
2. The device’s PASSWORD did not match the password in the RADIUS server’s database.
3. The RADIUS server’s database entry for this device contains errors.
[AUTH] RADIUS ROUTE LOOKUP rejected IP address:
The remote Authentication server route lookup feature rejected the IP address. This indicates that
one of the following has occurred:
1. The is not in the remote Authentication server’s database.
2. The is entered incorrectly in the remote Authentication server’s database.
[AUTH] Security data buffer allocated successfully
The Authentication agent was able to allocate and initialize all memory required to perform
authentication requests.
[AUTH] Security data buffer allocation failed
The Authentication agent was not able to allocate and initialize all memory required to perform
authentication requests. No authentication request will be attempted. Contact your Distributor or
Customer Support.