Cabletron Systems CSX1000 User Manual
Page 447
![background image](/manuals/72516/447/background.png)
Workgroup Remote Access Switch 447
S
YSTEM
M
ESSAGES
System Message Summary
Error mapping WAN adapter # ’x’ into Host memory map
The configured memory location of the indicated WAN card conflicts with another WAN card or
device. Review the configuration for the indicated adapter.
Error opening file
Error opening file
Error opening file
Error parsing old WAN (Direct Host) interface: bad format
The information contained in the WAN (Direct Host) interface is invalid. To correct, use CFGEDIT
to reconfigure the interface.
Error initializing WAN card:
WAN card installation and configuration. If the error continues, report the problem.
Error parsing old WAN (Direct Host) interface: LAN interface
already in use
“old” style WAN (Direct Host) interface. To correct, use CFGEDIT to delete any WAN (Direct Host)
interfaces on the problematic LAN port, and reconfigure them.
Error parsing old WAN (Direct Host) interface: no LAN interface for specified port
“old” style WAN (Direct Host) interface. To correct, use CFGEDIT to delete the problematic WAN
(Direct Host) interface. Afterwards, configure a LAN interface and then read the WAN (Direct
Host) interface.
Error parsing WAN (Direct Host) interface: no LAN interface for specified name
CFGEDIT to delete the problematic WAN (Direct Host). Check configuration for the suspect LAN
interface; it most likely will not be there. Add LAN interface, then reconfigure the WAN (Direct
Host) interface.
Error opening file \system\ethernt2.bin
The LAN adapter executable file could not be opened. Check for proper software installation.
Error programming adapter # ’x’ hardware
The WAN card initialization subsystem encountered an error while attempting to program the
hardware on the indicated adapter. Restart the system and review the configuration for the
adapter. If the problem persists, the indicated adapter card may be faulty; contact your Distributor
or Customer Support.
Error reading file
Distributor or Customer Support.
Error reading file \system\ethernet2.bin,section =
software installation.