Configuring other advanced options, Overview, Ppp configuration – Cabletron Systems CSX1000 User Manual
Page 333: Configuring ppp, Configuring other advanced options 333, Overview 333 ppp configuration 333, Configuring ppp 333, Onfiguring, Ther, Dvanced
C
ONFIGURING
O
THER
A
DVANCED
O
PTIONS
O
VERVIEW
This chapter provides information for configuring advanced system options that are not covered in
the previous chapters. These options include:
configuring default line protocol
configuring system compression options
PPP C
ONFIGURATION
C
ONFIGURING
PPP
Note:
A thorough understanding of PPP protocol is required before you attempt to change the
PPP configuration. By changing the PPP configuration, you are changing the PPP protocol
negotiation parameters. These parameters only need to be changed when you are
attempting to interoperate with devices that do not provide a standard PPP
implementation. Changing these parameters can result in PPP option negotiation failure
and the inability to communicate with remote devices. The default parameters are
adequate for most sites.
U
SING
CFGEDIT
1.
Select PPP Options from the options menu.
2.
Change the Global PPP options.
a.
Change the max terminate value.
b.
Change the max configure value.
c.
Change the max failure value.
d. Change the restart timer value.
3.
Change the LCP configuration options.
a.
Change the LCP protocol field compression (PFC).
b.
Change the LCP address control field compression (ACFC).
4.
Change the IPCP configuration options.
a.
Change the IPCP IP address negotiation initiation.
5.
Change the Link Failure Detection Options.
a.
Enable or disable the link failure detection feature.
b.
Set the echo frequency.
c.
Configure the maximum attempts.