Cabletron Systems CSX1000 - Manual (Page 144)

USER’S GUIDE
144 CyberSWITCH
TACACS:
with PINPAD SecureID Card
1. Enter login Id (remote machine).
2. Enter password onto SecurID card, which generates a dynamic password.
3. Enter dynamic password onto remote machine’s password prompt.
4. Press key when prompted for dynamic password.
with non-PINPAD SecureID Card
1. Enter login Id (remote machine).
2. Enter password (remote machine).
3. When prompted for a dynamic password, enter the dynamic password that is currently
displayed on your SecurID card onto your remote machine.
ACE:
with PINPAD SecureID Card
1. Enter login Id (remote machine).
2. You will be prompted for a passcode. To generate a passcode, enter your PIN onto the
SecurID card. The SecurID card will then generate a passcode.
3. Enter the SecureID passcode at the remote machine prompt.
with non-PINPAD SecureID Card
1. Enter login Id (remote machine).
2. At the passcode prompt, enter your 4-digit PIN followed by the 6-digit dynamic password
on your SecurID card. (This makes up your passcode).
Note: Password (RADIUS) is an encrypted password value, 1 to 12 ASCII characters in length.
Password or PIN (TACACS or ACE) is a personal identification number, 1 to 4 numeric
characters in length. Dynamic password or passcode is the 6-digit numeric value generated
by the SecurID card.
D EVICE AND U SER L EVEL S ECURITY
C ONFIGURING D EVICE AND U SER L EVEL S ECURITY
U SING CFGEDIT
1. Select Device and User Level Security from the Security Level Menu. If you need guidance to find
this menu, refer to the instructions provided in the
No Security configuration section.
2. Refer to the chapters Configuring Device Level Databases and Configuring User Level Databases in
order to select and configure the device level database and the user level database.
U SING M ANAGE M ODE
seclevel
Displays the current security level configuration data.