Ariens 931 - Manual (Page 154)

42” BOOT KIT NO. 731032
NOTE- THIS BOOT ACCESSORY MUST BE USED WITH MODEL
831011 ■ 42” MOWER (ONLY) WHEN INSTALLING VAC.
REF.
NO. PART
NO.
OESCRIPTION NO. REQ’O
1 030252 42” Collector Boot 1
2 030251 42” Mounting Bracket 1
3 061015 Machine Screw, 1/4-20 x 1/2 Round 2
4 064037 Washer 4
5 065056 Flange Whiziock Nut 2
6 030249 Collector Boot Clamp 1
7 059104 Cap Screw, 1/4-20 x 3/8 GR 2 HHPL 2
8 030250 Adjustor 1
9 011012 Wing Nut 1
10 065113 Wing Nut 1
NOTE; THIS BOOT ACCESSORY MUST BE USED WITH MODEL
831012 - 48” MOWER (ONLY) WHEN INSTALLING VAC.
REF.
NO. PART
NO. DESCRIPTION NO. REQ’D
1 030247 48” Collector Boot 1
2 030248 48” Coll. Extension 1
3 061041 Machine Screw, 1/4-20 x 1/2 Round 3
4 065056 Flange Whiziock Nut 3
5 030249 Collector Boot Clamp 1
6 059104 Cap Screw, 1/4-20 x 3/8 GR 2 HHPL 2
7 064037 Washer 2
8 030250 Adjustor 1
9 011012 Wing Nut 1
NOTE; THIS BOOT ASSEMBLY IS A COMPONENT OF LATER
MODEL VAC BAGGERS AND VAC TRAILERS AND MUST BE
USED WITH MODELS 831026, 28, 29,
PART
NO.
DESCRIPTION NO. REO’D
030737
030370
030249
059104
064037
030250
011012
8 030382
059080
10 065040
11 030388
12 030389
13 064002
60” Collector Boot 1
Collector Boot 1
Boot Clamp 1
Cap Screw, 1/4-20 X 3/8” 2
Washer, .256/.296 x 1-1/4 x 1/16” 2
Adjustor 1
Wing Nut 1
Stop Bracket 1
Cap Screw, 1/4-20 X 5/8” 2
Locknut, 1/4-20 2
Deflector Stop 1
Plate 1
Washer, 5116" 1
* THESE COMPONENTS ARE USED ONLY WHEN INSTALLING
VAC ON MODEL 831026 - 60” MOWER.
153