TeeJet Matrix 840G User Manual - Manual (Page 53)

98-05141 R2
87
●
APPENDIX A - ICON REFERENCE
Menu Options
Icon Description
Home – Displays Menu Options including
Unit Setup, Vehicle View, Field View,
RealView Guidance, Job View and Boom
Monitoring.
Unit Setup – Allows System,
BoomPilot/Single Boom, Vehicle, Tilt
Correction and FieldPilot setups.
System Setup. Sets options for lightbar,
culture (units, language & time zone),
GPS, console (volume, display brightness,
touch screen calibration, screenshot &
about/save) and video cameras.
BoomPilot/Single Boom Setup. Sets swath
overlap, delay on/off, number of boom
sections and associated boom section
widths.
Vehicle Setup. Sets vehicle type, antenna
height, boom direction and boom distance
from antenna.
Tilt Gyro Module Setup. Sets on/off and
calibrates tilt correction.
FieldPilot Setup. Sets autosteer on/
off, options for valve setup (frequency
and minimum & maximum duty cycles),
valve testing and FieldPilot confi guration
(coarse steering adjustment, fi ne steering
adjustment, deadband & look ahead).
Icon Description
Vehicle View – Allows a computer-
generated image of the vehicle
position displayed in the application
area. Access options for guidance
modes, boundary areas and
BoomPilot.
Field View – Allows a computer-
generated image of the vehicle
position and application area from an
aerial perspective. Access options for
boundary areas and marked point.
Enter World View and Pan modes.
RealView Guidance – Allows a single
live video input or a set of four live
inputs to be displayed instead of a
computer-generated image. Enter
guidance over video and steering
angle modes.
Job View – Allows saving of
information to a USB drive or clearing
of information from unit.
Boom Monitoring – Allows a
computer generated view of active/
inactive boom sections. Enable/
disable BoomPilot.
CHAPTER 5 – APPENDIX