TeeJet Matrix 840G User Manual - Manual (Page 29)

www.teejet.com
44
●
98-05141 R2
45
●
Level Tilt Position 2
6. Turn the vehicle 180 degrees and reposition the
vehicle in the same location.
7. Press
►OK ICON to Tilt Calibration Complete.
►PAGE RIGHT ARROW to Tilt Calibration
Complete.
►TILT GYRO MODULE SETUP TAB to
return to main Tilt Gyro Module Setup screen.
Figure 2-56: Level Tilt Position 2
Tilt Calibration Complete
8. Press
►OK ICON
►CHECKERED FLAG to complete Tilt Gyro
Module Setup.
►TILT GYRO MODULE SETUP TAB to
return to main Tilt Gyro Module Setup screen.
Figure 2-57: Tilt Calibration Completion
Tilt Correction Off
Tilt Correction is used to turn on/off Tilt Gyro Module
(TGM).
1. Press TILT CORRECTION ICON
2. Select “Off”
3. Press
►CHECKERED FLAG to complete Tilt Gyro
Module Setup.
►TILT GYRO MODULE SETUP TAB to
return to main Tilt Gyro Module Setup screen.
Figure 2-58: Tilt Correction Off
Tilt Correction Unavailable
If a TGM or SCM is not connected, calibration
options will not be available.
Figure 2-53: Tilt Gyro Module Not Detected
Tilt Correction On and Calibrate
Tilt Correction On and calibration is used to turn on/
off Tilt Gyro Module (TGM) and to calibrate the gyro.
On/Off
1. Press TILT CORRECTION ICON
2. Select “On”
3. Press
►PAGE RIGHT ARROW to Level Tilt
Position 1.
►TILT GYRO MODULE SETUP TAB to
return to main Tilt Gyro Module Setup screen.
Figure 2-54: Tilt Correction On
Level Tilt Position 1
4. Position the vehicle on a level surface.
5. Press
►OK ICON to Level Tilt Position 2.
►PAGE RIGHT ARROW to Level Tilt
Position 2.
►TILT GYRO MODULE SETUP TAB to
return to main Tilt Gyro Module Setup screen.
Figure 2-55: Level Tilt Position 1