TeeJet Matrix 840G User Manual - Manual (Page 36)

www.teejet.com
56
●
98-05141 R2
57
●
Figure 3-5: Inward Last Pass Guidance
Figure 3-6: Outward Last Pass Guidance
Figure 3-7: Last Pass Guidance with Boundary
GUIDANCE BAR & STATUS BAR
The Guidance Bar and Status Bar give you a quick
reference to the current guidance information and
unit settings.
Guidance Bar
Informs you of your Current Speed, Swath Number
(positive number = to the right of the A-B baseline,
negative number = to the left of the A-B baseline),
Navigation Activity (Cross Track Error (feet/meters),
Current Activity and GPS Status) and Accumulated
Area.
Figure 3-8: Guidance Bar Examples
Swath acres
0.00 0
No GPS
mph acres
1.35 14.4
8.9
kph ha
1.20 2.5
Mark A
Accumulated Area Navigation Activity
GPS Status
Cross Track Error
Current Activity
Current Speed
or
Swath Number
Curved A-B Guidance
Curved A-B Guidance provides guidance along
curved lines based on an initial A-B reference line.
This initial baseline is used to calculate all other
guidelines.
Figure 3-2: Curved A-B Guidance
NOTE: Curved guidance is recommended not to
exceed 30° within the A-B guideline.
HINT: Start on the longest curve of the field. While
working in a bounded area, the guidance
pattern extending beyond the established
A-B points will be straight line guidance.
Circle Pivot Guidance
Circle Pivot guidance provides guidance around a
central location that radiates inward or outward. It
is used for product application in a center pivot fi eld
while being guided along a circular guideline that
matches a center pivot irrigation system radius.
Figure 3-3: Inward Circle Pivot Guidance
Figure 3-4: Outward Circle Pivot Guidance
Last Pass Guidance
Last Pass Guidance offers true last pass navigation.
The console will automatically detect the nearest
“applied” guideline and establish parallel pass based
on that guideline.
NOTE: If a boundary is established but no
application occurred during the boundary
process, guidance will not initiate.