beautypg.com

Split camera view, Four channel vsm, No vsm – TeeJet Matrix 840G User Manual User Manual

Page 47: Eight channel vsm

background image

www.teejet.com

78

98-05141 R2

79

Four Channel VSM

When a four (4) channel VSM is on the system, up
to four (4) cameras can be installed. Only Cameras
A, B, C and D will be available for setup.
To change active a single camera view:
1. Press the screen to activate the icons and select

the VIDEO ICON .

2. Press the desired CAMERA

A

,

B

,

C

or

D

to

change the video view.

NOTE: A camera

C

is not available for selection

(grayed out) when unavailable. If no icons
are available, a VSM is installed, but a single
camera is directly attached.

NOTE: If a VSM is not installed, the VIDEO ICON

is not available.

Figure 3-56: Camera Selection

Swath

acres

0.0

0

0.0

mph

acres

0.0

0

0.0

Figure 3-57: Only One Camera Available

Swath

acres

0.0

0

0.0

mph

acres

0.0

0

0.0

Split Camera View

Split Camera View allows one of two sets of four
camera inputs (A/B/C/D or E/F/G/H) to be selected
to divide the screen into four separate video feeds
while in RealView Guidance if a Video Selection
Module (VSM) is attached.
If a VSM port does not have a camera installed, a
blue screen with the TeeJet logo will fi ll that port’s
screen quarter.

Figure 3-58: Inactive Camera Ports

Swath

acres

0.0

0

0.0

No VSM

If a VSM is not installed, the SPLIT VIEW ICON
is not available and only one (1) video feed will be
available.

Figure 3-59: VSM Not Installed

Swath

acres

0.0

0

0.0

Eight Channel VSM

When a eight (8) channel VSM is on the system,
up to eight (8) cameras can be installed. Two sets
of four camera inputs (A/B/C/D or E/F/G/H) can be
selected.

NOTE: If installing four or less cameras, all in ports

A, B, C or D, setup screens will follow Four
Channel VSM instructions.

NOTE: If a VSM is not installed, the SPLIT VIEW

ICON is not available.

To change active a set of split camera views:
1. Press the screen to activate the icons and select

the SPLIT VIEW ICON .

2. Select

►CAMERAS A/B/C/D

A

B

C

D

►CAMERAS E/F/G/H

E

F

G

H

NOTE: If only set A/B/C/D is available, cameras are

only installed on ports A, B, C and D.

Figure 3-60: Split View

Swath

acres

0.0

0

0.0

This manual is related to the following products: