TeeJet Matrix 840G User Manual - Manual (Page 21)

www.teejet.com
28
●
98-05141 R2
29
●
Volume
Volume adjusts the volume level of the audio
speaker. Range is 0 - 100.
1. Press CONSOLE ICON .
2. Press VOLUME ICON .
3. Press the PLUS/MINUS ICONS to adjust
volume level.
◄Higher the number, the louder the sound.
◄Lower the number, the softer the sound.
4. Press
►PAGE RIGHT ARROW to proceed to LCD
Brightness.
►SYSTEM SETUP TAB to return to main
System Setup screen.
NOTE: Press & hold PLUS/MINUS ICONS to
quickly adjust settings.
Figure 2-20: Volume
LCD Brightness
LCD Brightness adjusts the brightness of the
console display. Range is 0 - 100.
1. Press CONSOLE ICON .
2. Press LCD BRIGHTNESS ICON .
3. Press the PLUS/MINUS ICONS to adjust
LED brightness.
◄Higher the number, the brighter the LCD.
◄Lower the number, the dimmer the LCD.
4. Press
►PAGE RIGHT ARROW to proceed to
Touch Screen Calibration.
►SYSTEM SETUP TAB to return to main
System Setup screen.
NOTE: Press & hold PLUS/MINUS ICONS to
quickly adjust settings.
WARNING!: In hot conditions, settings above 50
may cause a High Temperature Warning.
The console will automatically dim the
screen to reduce the console temperature.
Figure 2-21: LCD Brightness
PRN
Location PRN
Western US 135
Eastern US 138
Central US 135 or 138
South America N/A
Europe 120 or 124
GGA Requirements
GGA Quality required to be able to work with
various types of signal can vary. See table below for
requirements.
Service GGA
Quality Accuracy
Omnistar HP/XP 5 10 cm
RTK 4 4 cm
Glide 9 <1 m
WAAS/EGNOS/Beacon 2 <1 m
GPS only 1 <3 m
Console
Console Setup is used to confi gure Volume, LCD
Brightness, Screen Calibrate and Screenshot
settings, as well as view About information and Save
system software information.
1. Press SYSTEM SETUP TAB
2. Press CONSOLE ICON .
3. Select from:
►Volume – adjusts the volume level of the
audio speaker
►LCD Brightness – adjusts the brightness
of the console display
►Touch Screen Calibration – used to force
a touch screen calibration
►Screenshot – allows screen images to be
saved a USB drive
►About/Save – displays the system
software version as well as the software versions
of modules connected to the CAN bus
OR
Press PAGE RIGHT ARROW to cycle through
all settings.
NOTE: While in a setting screen, press icon to view
available factory settings and setting ranges.
Figure 2-19: Console