Maxim Integrated MAXQ Family Users Guide: MAXQ2000 Supplement - Manual (Page 93)

MAXQ Family User’s Guide:
MAXQ2000 Supplement
REVISION HISTORY
Rev 0; 10/04: Original release.
Rev 1; 10/05: Family Commands section updated. Commands 11h, 20h, 21h, 30h, 31h, and 60h, input to dump, > 256, byte 3
changed from AddressH to AddressL.
Rev 2; 11/05: Added note on using the alternate 32kHz clock with Timer 2.
Updates and clarifications to POR, LCD, interrupt, utility ROM, and JTAG sections.
Added instruction set summary table from MAXQ Family User’s Guide to Section 18.
Rev 3; 6/07: Corrected P6.5 special function from Timer 2 (Type 2) to Timer 0 (Type 2) in Table 10 and Table 11 (pages 34 and 36).
Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical
Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
© Maxim Integrated The Maxim logo and Maxim Integrated are trademarks of Maxim Integrated Products, Inc.