beautypg.com

Juniper Systems Archer 2 User Guide User Manual

Page 89

background image

Ch 9 Barcode Scanner

85

Barcode Setup

When you select Barcode Setup, The Barcode Connector

control panel is displayed. Near the top of the screen is a

horizontal scrolling menu. Select screens from the menu to

view or edit the configurations for the Barcode Connector

utility and the barcode hardware. A description of these

screens follows.

User Screen

The User screen has the following functions:

„

Button Control Panel – The target button is the scan

button by default. You can change this to another

programmable button from the Button control panel.

Select the hyperlink to view that screen.

„

Trigger Mode While Holding Scan Button – Select Scan to

start scanning the moment the button is pressed. Select

Aim to turn on the aimer when the button is pressed and

to start scanning when the button is released.

„

Beep On and Visual On – Select options for audio and

visual indicators based on good or bad scan reads.