beautypg.com

Juniper Systems Archer 2 User Guide User Manual

Page 81

background image

Ch 8 3G Data Modem

77

3. Remove the battery pack.

CAUTION:

The Archer 2 is not sealed against water and

dust when the battery door is not installed.

4. An image on the battery compartment label shows the

correct location and orientation for the mini SIM card.

Pull out the SIM card tray. Place the card onto the tray

and push the tray in until it catches.

To remove the SIM card, pull the tray open and remove

the card. Push the empty tray in until it catches.

5. Replace the battery pack, and attach the battery door.
6. Power on the Archer 2.

Note: If the modem was on before shutting the Archer

2 down to insert the SIM card, you are prompted to

configure the data connection when you reboot. See

the instructions on the following pages.

!