beautypg.com

Barcode connector utility – Juniper Systems Archer 2 User Guide User Manual

Page 87

background image

Ch 9 Barcode Scanner

83

6. Put the cursor where you want the barcode data to be

placed.

7. Using the red crosshairs, aim the scanner at the barcode

you are scanning. Press the target button to begin

scanning.

8. When the scanner decodes the barcode, the data

is placed in your document. (With Excel, tap on the

column you want the data to appear in.)

Barcode Connector Utility

The Barcode Connector

utility is a barcode wedge

program provided with the barcode scanner. Depending

on the configuration of your Archer 2 it either loads

automatically when the handheld is turned on or you can

open it from the Home screen.
Note: If the program does not appear in the Home screen

favorites bar as shown below (lower right-hand corner), tap

the Windows Start screen key

and find it in the Start menu.