beautypg.com

Juniper Systems Archer 2 User Guide User Manual

Page 10

background image

6

Archer 2 Rugged Handheld Owner’s Manual

Attach the Stylus Tether

A capacitive stylus and tether are included with the

handheld.
Note: A stylus is not required to use the touchscreen. The

optimal way to make selections is by finger touch.
One end of the tether is attached to the stylus. To attach it

to the hand strap, follow these steps:
1. Pull the free tether loop through the tether ring on the

hand strap. Insert the stylus with the attached tether

through this loop and tighten the loop.

2. Place the stylus into the holder on the hand strap.

Perform Set Up

1. The handheld powers on and begins the startup

process. A splash screen is shown that includes a

progress indicator at the bottom of the screen.

2. A Microsoft

®

Windows Embedded Handheld screen is

shown.

3. The Clock and Alarms control panel appears. Adjust the

time zone, date and time if necessary and tap OK.