Juniper Systems Archer 2 User Guide User Manual
Page 64
60
Archer 2 Rugged Handheld Owner’s Manual
JSNav Settings
Tap on the menu icon in the upper left corner of the
screen, and select Settings from the list. Go through the
menu options to set up JSNav.
Note: These settings only impact the JSNav application.
To set up GPS/GNSS go to the
GNSS Settings control panel
discussed earlier in this chapter.
Units: Select English or metric units of measurement and
the display format for latitude and longitude.
GPS Settings: Select the maximum PDOP for collecting
points, minimum navigation speed you need to be
traveling for navigation to update properly, and the
navigation distance threshold. This is the distance you
can be from the point to which you are navigating to
show that you have arrived.
Default File Type: Select .kml (keyhole markup language
used in Google Earth) or .csv (comma separated value).
Note that tracks with more than 1000 points default to
.csv due to memory limitations.
Waypoint Settings: Set up the waypoint file naming
scheme, including the waypoint prefix, increment step
size, and current value. For example, if the waypoint
prefix is Point, increment step size is 10, current value is