Juniper Systems Archer 2 User Guide - Manual (Page 23)

Ch 2 Hardware Components 19
Zoom options:
„
Hold-to-Zoom - Press and hold the P1 button on the
keypad (the default setting), and tap on the screen in the
area on which you want to zoom. The screen focuses on
that location. Make selections as desired. Release the P1
button to return to the regular screen size.
„
Magnifying glass - Tap on the title bar at the top of the
screen to display the pop-up icons. Select the magnifying
glass on the left.
This zooms in on the content. Move the screen around
with your finger until you find the information you want.
Select the magnifying glass symbol in the upper right
corner of the screen to return the view to the regular size.
Display Backlight Brightness Settings
The default setting for the display backlight is 80%. Adjust
the display brightness by pressing the brightness down
button sequence, shift + P3 , and brightness up button
sequence, shift + P4 . You can also make brightness
adjustments through the Backlight control panel by pressing
Start > Settings > System > Backlight. External Power and
Battery Power are adjusted on different screens. Select
these screens from the horizontal scrolling menu near the
top of the screen.