beautypg.com

Juniper Systems Archer 2 User Guide User Manual

Page 88

background image

84

Archer 2 Rugged Handheld Owner’s Manual

When the Barcode Connector utility loads, the main screen

appears:

You can select three options, depending on how you want

the Barcode Connector utility and barcode to behave

during startup and suspend. Tap on the check boxes to turn

options on or off.

Two main functions are accessed from here:
1. Barcode Setup – Use the setup screens to configure

the settings of the barcode hardware and Barcode

Connector utility.

2. Power Down Barcode and Exit – This function shuts

down the barcode scanner. You may want to do this

to prevent accidental triggering of a scan sequence.

Otherwise, we recommend that you leave it powered

on. The barcode is configured to enter a sleep state

when it is inactive and consumes about 8mW of power

when it is in this state.

To minimize the Barcode Connector utility press the X soft

key in the bottom right corner of the display.