beautypg.com

Connecting to a wi-fi network, Wi-fi wireless networking – Juniper Systems Archer 2 User Guide User Manual

Page 56

background image

52

Archer 2 Rugged Handheld Owner’s Manual

Wi-Fi Wireless Networking

The Archer 2 has built-in Wi-Fi wireless networking to

connect to the Internet or a office network.

Connecting to a Wi-Fi Network

To use Wi-Fi, you need to be in range of a Wi-Fi access

point to make a connection. To actively look for a network

connection complete the following steps:
1. From the Home screen, turn Wi-Fi on by tapping the

Wi-Fi gadget . The Archer 2 automatically starts

scanning the area for available Wi-Fi networks. (If the

Wi-Fi gadget is not on the Home screen, open the Start

screen, and select Getting Started. Select Set up Wi-Fi or

press Start > Settings > Connections > Wireless Manager.)

2. Tap-hold the Wi-Fi icon on the Home screen to go to

the Wi-Fi control panel. When the handheld completes